Ezer 3 Mirror Lens
Directions for use:
- If it is necessary to fill liquid between the cornea and the contact lens while it is used. Keeps the lens clean to minimize glare from the lens surface.
Clean and Sterelization
- Rinse the lens with the flowing cool water about 30~60 seconds.
- Clean the lens surface by the means of tampon wetted with 75% alcohol.
- Wipe up the lens with a soft fabric which has been sterilized.
- Dry carefully and place in dry storage case.
Attention
- Please don't use the organic solvent such as the ether.
- The lens can't be sterilized by means of the ultraviolet radiation.
- When the lens is soaked into the liquid, the time can't exceed an hour.
- The temperature of the liquid which is used for cleaning the lens can't exceed 70°C
Storage
This equipment should be stored in a well-ventilated room without corrosive gas.
- If it is necessary to fill liquid between the cornea and the contact lens while it is used. Keeps the lens clean to minimize glare from the lens surface.
Clean and Sterelization
- Rinse the lens with the flowing cool water about 30~60 seconds.
- Clean the lens surface by the means of tampon wetted with 75% alcohol.
- Wipe up the lens with a soft fabric which has been sterilized.
- Dry carefully and place in dry storage case.
Attention
- Please don't use the organic solvent such as the ether.
- The lens can't be sterilized by means of the ultraviolet radiation.
- When the lens is soaked into the liquid, the time can't exceed an hour.
- The temperature of the liquid which is used for cleaning the lens can't exceed 70°C
Storage
This equipment should be stored in a well-ventilated room without corrosive gas.
